Related
Documentation
Understanding the SRX4100 Services Gateway Front Panel on page 5•
• Understanding the SRX4100 Services Gateway Back Panel on page 8
• SRX4100 Services Gateway Environmental Specifications on page 20
SRX4100 Services Gateway Environmental Specifications
Table 12 on page 20 provides the required environmental conditions for normal SRX4100
Services Gateway operations. In addition, the site must be as dust-free as possible
because dust can clog air intake vents, reducing the efficiency of the cooling system.
Table 12: Environmental Specifications
ValueDescription
No performance degradation up to 6,562 feet (2000 meters).Altitude
Normal operation ensured in relative humidity range of 5% through
90%, noncondensing.
Relative humidity
•
Normal operation ensured in temperature range of 32° F through
104° F (0° C through 40° C).
•
Nonoperating storage temperature in shipping container: –40° F
through 158° F (–40° C through 70° C).
Temperature
Related
Documentation
SRX4100 Services Gateway Physical Specifications on page 19•
General Site Installation Guidelines
To plan and create an acceptable operating environment for your services gateway and
prevent environmentally caused equipment failures:
•
Follow the prescribed electrostatic discharge (ESD) prevention procedures to prevent
damaging the equipment. Static discharge can cause components to fail completely
or intermittently over time.
•
Follow prescribed airflow guidelines to ensure that the cooling system functions
properly. The airflow around the chassis must be unrestricted. Allow sufficient clearance
between the front and back of the chassis and adjacent equipment. Ensure that there
is adequate circulation in the installation location.
•
Keep the area around the chassis clear and free from dust.
Related
Documentation
Site Electrical Wiring Guidelines on page 21•
Copyright © 2017, Juniper Networks, Inc.20
SRX4100 Services Gateway Hardware Guide
To Next Page
Loading...
