CHAPTER 15
Maintaining Components
•
Routine Maintenance Procedures for the SRX4100 Services Gateway on page 59
Routine Maintenance Procedures for the SRX4100 Services Gateway
For optimum performance of the services gateway, perform the following preventive
maintenance procedures regularly:
•
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
•
Make sure that airflow is unobstructed around the services gateway and into the air
intake vents. Make sure that all power and grounding cables are arranged so that they
do not obstruct access to other services gateway components.
•
Check the status LEDs on the front panel of the services gateway.
•
Periodically inspect the site to ensure that the grounding and power cables connected
to the services gateway are securely in place and that there is no moisture accumulating
near the services gateway.
Related
Documentation
• Troubleshooting Resources for the SRX4100 Services Gateway on page 61
• Monitoring Chassis Alarms on a SRX4100 Services Gateway on page 61
59Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
