Juniper SRX4100 - Part 4 Maintaining and Troubleshooting Components

CHAPTER 10
Installing the Services Gateway
•
SRX4100 Services Gateway Installation Overview on page 41
•
Installing the SRX4100 Services Gateway in a Rack on page 42
SRX4100 Services Gateway Installation Overview
To install and connect an SRX4100 Services Gateway:
1. Follow instructions in “Unpacking the SRX4100 Services Gateway” on page 39.
2. Install power supplies if they are not preinstalled. See:
•
Installing an AC Power Supply in an SRX4100 Services Gateway on page 68
•
Installing a DC Power Supply in an SRX4100 Services Gateway on page 72
3. Mount the servicesgateway asdescribed in “Installing the SRX4100 Services Gateway
in a Rack” on page 42.
4. Connect the grounding cable as described in “Connecting the SRX4100 Services
Gateway Grounding Cable” on page 45.
5. Follow instructions for connecting power as appropriate for your site. See:
•
Connecting AC Power to an SRX4100 Services Gateway on page 47
•
Connecting DC Power to an SRX4100 Services Gateway on page 48
6. Perform initial configuration by following the instructions in “Configuring the SRX4100
Services Gateway” on page 54.
Related
Documentation
SRX4100 Services Gateway Rack Requirements on page 23•
• Cabinet Requirements for SRX4100 Services Gateways on page 24
• Clearance Requirements for Airflow and Hardware Maintenance for SRX4100 Services
Gateways on page 25
41Copyright © 2017, Juniper Networks, Inc.