CHAPTER 7
Transceiver and Cable Specifications
•
Pluggable Transceivers Supported on SRX4100 Services Gateways on page 33
•
SFP+ Direct Attach Copper Cables for SRX4100 Services Gateways on page 33
Pluggable Transceivers Supported on SRX4100 Services Gateways
The ports on the SRX4100 Services Gateway supports SFP+ transceivers. The following
are the transceivers supported on the services gateway:
•
EX-SFP-10GE-ER
•
SRX-SFP-10GE-LR
•
SRX-SFP-10GE-SR
•
JNP-10G-SR-8PACK
•
SRX-SFP-1GE-LH
•
SRX-SFP-1GE-LX
•
SRX-SFP-1GE-SX
•
JNP-1G-SX-8PACK
•
EX-SFP-1GE-T
NOTE: The SRX4100 Services Gateway supports only 1000 Mbps speed
on EX-SFP-1GE-T; 10-Mbps and 100-Mbps speeds are not supported.
•
JNP-1G-T-8PACK
For the full specifications of these transceivers, see The Hardware Compatibility Tool.
Related
Documentation
SFP+ Direct Attach Copper Cables for SRX4100 Services Gateways on page 33•
SFP+ Direct Attach Copper Cables for SRX4100 Services Gateways
Small form-factor pluggable plus transceiver (SFP+) direct attach copper (DAC) cables
are suitable for short distances of up to 23 ft (7 m), making them ideal for highly
33Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
