Juniper SRX4100 - Page 79

•
To prevent the RESET button from setting the services gateway to the factory-default
configuration and deleting all other configurations, enter the following command. You
can still press and quickly release the button to reset it to the rescue configuration.
user@host# set chassis config-button no-clear
•
To prevent the RESET button from setting the services gateway to the rescue
configuration, enter the following command. You can still press and hold the button
for 15 seconds or more to reset the services gateway to the factory-default configuration.
user@host# set chassis config-button no-rescue
•
To disable the button and prevent the services gateway from resetting to either
configuration, enter the following command:
user@host# set chassis config-button no-clear no-rescue
The no-rescue option prevents the RESET button from loading the rescue configuration.
The no-clear option prevents the RESET button from deleting all configurations on the
services gateway.
To return the function of the RESET button to its default behavior, remove the
config-button statement from the services gateway configuration.
Related
Documentation
• Understanding the SRX4100 Services Gateway Front Panel on page 5
63Copyright © 2017, Juniper Networks, Inc.
Chapter 16: Troubleshooting Components