List of Figures
Part 1 Access Point Overview and Components
Chapter 1 WLA532E Access Point Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Figure 1: WLA532E External Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Figure 2: WLA532E Hardware Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Figure 3: A WLA532E with Installed Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Part 5 Installing, Connecting, and Verifying the Access Point
Chapter 7 Installing and Connecting the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Figure 4: Antenna Orientation for Best Reception . . . . . . . . . . . . . . . . . . . . . . . . . 47
Figure 5: Opening the Ceiling Bracket Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Figure 6: Opening the Ceiling Bracket Snaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Figure 7: Locking the Bracket Clips over the Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Figure 8: Aligning the Access Point with the Ceiling Bracket . . . . . . . . . . . . . . . . . 50
Figure 9: Locking the Access Point onto the Ceiling Tile . . . . . . . . . . . . . . . . . . . . . 51
Figure 10: Removing the M4 Flat Head Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 11: Removing the Diamond Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 12: Orienting the Installed WLA532E Antennas . . . . . . . . . . . . . . . . . . . . . . 53
Figure 13: Mounting the WLA532E to the Plenum Bracket . . . . . . . . . . . . . . . . . . . 54
Figure 14: Aligning the Plenum Bracket Flanges with the Ceiling Cross Rails . . . . 54
Figure 15: Aligning the Plenum Bracket Tabs to Bracket Openings . . . . . . . . . . . . 55
Figure 16: Securing the Locked Plenum Bracket Using the Provided M4
Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Figure 17: Securing the Plenum Bracket to the Ceiling Rail Using Sheet Metal
Self-Threading Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Figure 18: Unlocking the Universal Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . 58
Figure 19: The Exposed WLA522 Universal Mounting Bracket on the Ceiling
T-bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Figure 20: Earthquake Safety Stability Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Figure 21: Rotating the Locking Bracket into an Open Position . . . . . . . . . . . . . . . 59
Figure 22: Aligning the Legacy Mounting Bracket Adapter Alignment Pins to the
Universal Bracket Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Figure 23: Rotating the Locking Bracket into a Locked Position . . . . . . . . . . . . . . . 60
Figure 24: Locked Bracket Tabs on the WLA522 Mounting Bracket . . . . . . . . . . . 60
Figure 25: Opening the Ceiling Bracket Snaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Figure 26: Aligning the Ceiling Mount Bracket with the Legacy Mounting Bracket
Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Figure 27: Orienting the Installed WLA532E Antennas . . . . . . . . . . . . . . . . . . . . . . 62
Figure 28: Aligning the Access Point with the Ceiling-Mount Bracket . . . . . . . . . . 62
Figure 29: A WLA532 Installed on the Legacy Mounting Bracket Adapter . . . . . . 63
vCopyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
