O
White Balance Mode
Displays the current white balance mode.
(*****K indicates color temperature)
A *****K : When the [WHT BAL B/A/PRESET]
switch is set to “A” in the Manual White
Balance mode.
B *****K : When the [WHT BAL B/A/PRESET]
switch is set to “B” in the Manual
White Balance mode.
P *****K : When the [WHT BAL B/A/PRESET]
switch is set to “PRESET” in the
Manual White Balance mode.
a
FAW
: During Full Auto White Balance
mode.
FAW
: While in the Full Auto White Balance
mode, and [AE Lock] is set for “FAW”
or “AE/FAW” during lock operation.
(A P70 [Preset Mode (PRESET)] )
(A P71 [Memory A Mode (A), Memory B Mode
(B)] )
Memo :
0
When [Preset Paint
], [AWB Paint] or [FAW
Paint] is set to a setting other than the default
value, a q icon is displayed to the right of the
color temperature.
P
Expanded Focus/Histogram
Displayed
upon pressing the user button that is
assigned with “Expanded Focus” and
“Histogram”.
Memo :
0
Display switches in the order of “Expanded
Focus” > “Histogram”.
Q
Infrared Recording
“I” is
displayed when the infrared recording is
ON.
R
Face Detection
Displayed when Face Detection is ON.
q
: When [Face Detection] is set to
“ON”
H
: When [Face Only AF] is configured
to “ON” while [Face Detection] is
“ON”
S
Image Stabilizer Mark
Displayed when the image stabilizer is ON.
i
: When [Level] of [OIS] is set to
“Normal”.
j
: When [Level] of [OIS] is set to “High”.
Memo :
0
When Image Stabilizer is configured to
“OFF”,
h is displayed for 3 seconds.
T
Focus Assist
0
“ ” is displayed when auto focus is
activated.
0
When ACCU-Focus is enabled, “ACCU ”
blinks for about 10 seconds while Focus
Assist starts up, after which the “
”
indicator lights up.
0
If recording starts while [ACCU-Focus
] is
active, [ACCU-Focus] will be forcibly
deactivated.
(A P128 [ Focus Assist ] )
U
Luminance Information
Displayed when the Spot Meter function is
activated.
MAX : Maximum luminance
MIN : Minimum luminance
V
Zebra pattern
During zebra pattern display,
(zebra icon)
is displayed on the display screen in Camera
mode.
(A P
82 [Setting Zebra Pattern] )
W
Time Display
Displays the current time.
Memo :
0
The date/time display style can be configured in
[System] B [Date/Time].
0
When [
System] B [Record Set] B [Time Stamp]
is set to “On”, this item is not displayed.
X
Focus Display
Displays the focus state and the approximate
distance to the subject in focus.
d
:
Manual focus
e
: Autofocus
: Autofocus lock
C
:
[AF Area]-“Wide”
D
: [AF Area]-“Multi”
Memo :
0
The displayed unit of measurement (feet or
meter)
can be configured in [LCD/VF] B [Display
Type] B [Focus].
0
When focus display is grayed, Auto Focus
cannot function.
168
Display Screen in Camera Mode
Display/Status Screen
To Next Page
Loading...
Need help?
General
