JVC GY-HC500E - About the Operation Lock Feature (KEYLOCK)

About the Operation Lock
Feature (KEYLOCK)
You can use this feature to prevent erroneous
camera operation.
.
1
Set the [KEYLOCK] switch to “ON”.
0
The
operation lock turns on, and an operation
lock icon (r) appears on the display
screen.
0
The
operation lock function is turned off when
the [KEYLOCK] switch is set to “OFF”.
Memo :
0
The operation lock feature is only valid in the
Camera mode.
(A P24
[Operation Modes] )
0
The following remote operations are possible
even when the operation lock feature is turned
on (“On”).
0
Remote operation from the wired remote
control
connected to the [REMOTE] terminal.
0
Remote operation of the camera through
access via a browser on devices such as a
smartphone, tablet terminal, or PC.
Operation lock does not apply to the following
buttons and switches.
0
[
POWER ON/OFF] switch
0
[ND FILTER] switch
0
[TC IN/OUT] switch
0
Focus Ring
0
Zoom Ring
0
Iris Ring
0
Zoom Lever at the Grip
0
Zoom Lever on Handle
0
[FIX/VAR/OFF] switch
Memo :
0
Operation
lock does not apply to the REC button
if “Keylock Except Rec” is selected in [Camera
Function] B [KEYLOCK].
(A P113
[ KEYLOCK ] )
54
About the Operation Lock Feature (KEYLOCK)
Preparations