JVC GY-HC500E User Manual

Setting the User’s Bit
You can add the date, time or an 8-digit
hexadecimal number as the user’s bit to the
recorded image.
Selecting a Recording Mode
Recording date/time information to the user’s
bit
1
Set [TC/UB] B [UB Mode
] to “Date” or
“Time”, and press the Set button (R).
(A P126
[ UB Mode ] )
The date or time information is recorded to the
user’s bit.
Memo :
0
When “Date”
or “Time” is set, [Preset] appears
as “-” and cannot be set.
0
“Time”
is displayed in the 24-hour format.
Presetting the User’s Bit
Recording arbitrary information (8-digit
hexadecimal) to the user’s bit
1
Set [TC/UB] B [
UB Mode] to “Preset”, and
press the Set button (R).
(A P
126 [ UB Mode ] )
.
1
TC/UB
UB Mode
Preset
Time
Preset
Date
Memo :
0
When [TC/UB] B [TC Generator] is set to
“Regen”, the parameter is displayed as
“<Regen>” and cannot be selected.
(A P
125 [ TC Generator ] )
2
Select [
TC/UB] B “Preset” and press the Set
button (R).
The [Preset] setting screen appears.
3
Use the cross-shaped button (HI)
to place
the cursor at the item to set, then use the
cross-shaped button (JK) to change the
values.
Numbers between 0 and 9 or alphabets
between
A and F can be specified for the user’s
bit.
.
TC/UB
Cursor
Memo :
0
Press the
[OIS/2] button to reset each digit to
“0”. The cursor moves to the left.
4
Check the values and press the Set button
(R).
0
The
user’s bit is set and the screen returns to
[TC/UB].
0
To cancel the setting, press the [CANCEL]
button.
5
Press the [MENU/THUMB] button.
Returns to the normal screen.
80
Setting the User’s Bit
Shooting

JVC GY-HC500E Specifications

General

Brand	JVC
Model	GY-HC500E
Category	Camcorder
Language	English