Setting the Gain
This
function electrically boosts the light sensitivity
when there is insufficient illumination on the object.
You can set the gain of the video amplifier
according to the brightness of the object. Select the
setting mode according to your shooting
conditions.
.
Automatic Gain Mode (Automatic Gain
Adjustment)
1
Set the [FULL AUTO] switch to “OFF”.
2
Press the [GAIN] button to set to the AGC
mode.
The gain of the video amplifier is automatically
set according to the brightness of the subject.
A a icon appears on the left side of the gain
value in the AGC mode.
Memo :
0
Setting
the [FULL AUTO] switch to “ON” to enter
the Full Auto mode also activates the Auto Gain
mode. In this case, the Iris, Shutter and White
Balance also enter into Auto mode forcibly.
0
The switching operation of the [GAIN L/M/H]
switch is disabled in the Full Auto mode.
0
The upper limit of the gain setting value during
AGC operation can be set in [Camera Function]
B [AGC Limit].
(A P
111 [ AGC Limit ] )
0
While in the Auto Gain mode, and
[AE Lock] is
set to “AE” or “AE/FAW”, a
icon appears on
the left side of the gain value during lock
operation.
Manual Gain Mode (Manual Gain
Switching)
1
Set the [FULL AUTO] switch to “OFF”.
2
Press the [GAIN]
button to set to the manual
gain mode, followed by selecting the [GAIN
L/M/H] switch
0
Use the [GAIN L/M/H
] switch to display the
gain of the selected video amplifier.
0
The gain level appears on the screen.
0
The a icon on the screen disappears.
.
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
5 . 6 f t
B 5600
K
0
The default positions of the switch are as
follows.
[L] : 0 dB
[M]
: 6dB
[H] : 12dB
Memo :
0
You
can change the gain value of each position
in the menu. Increasing the sensitivity causes
the screen to appear grainier.
(A P112 [GAIN L, GAIN M, GAIN H] )
66
Setting the Gain
Shooting
To Next Page
Loading...
Need help?
General
