Splitting the Clips Freely
(Clip Cutter Trig)
You
can split the clips freely without having to stop
recording during shooting.
1
Assign the “Clip Cutter Trig” function to
any of the user buttons.
(A P
46 [Assignment of Functions to User
Buttons] )
2
Press the user button that is assigned with
“Clip Cutter Trig
” during shooting.
A clip cut icon (Q) appears on the display
screen for 3 seconds, and the clip is split.
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
5 . 6 f t
B 5600
K
4030 20
10
0
Memo :
0
Clips cannot be split again for a few seconds
after the operation is performed.
0
This item cannot be used when
[Slot Mode] is
set to “Backup Y” or “Backup G”.
0
This item cannot be used when
[Rec Mode] is
set to a value other than “Normal” or “Pre Rec”.
(A P160 [ Rec Mode ] )
0
The split clips are recorded seamlessly without
interruptions in the video.
0
When “4K EXT (SSD)
”, Exchange (U model) or
MP4 (E model) is selected, the clip cutter
function cannot be used.
Configuring Infrared
Recording
This camera recorder comes with a infrared
recording
mode that is suitable for night recording.
Using infrared illumination allows images to be
captured naturally in a pitch-dark environment. It is
recommended for observation of animals without
alerting them or for natural facial expressions
without firing glaring flash light at the subject.
1
Set the [FULL AUTO] switch to “OFF”.
2
Set [Camera
Function] B [Infrared] to “On”.
A “I” icon appears.
Caution :
0
Do not use infrared recording for capturing
strong light sources or heat sources. Doing so
may damage the camera recorder.
Memo :
0
The settings are fixed as followed when it is
configured to
“On”.
0
Manual focus
0
ND Filter“OFF”
0
[Camera Function] B [Focus] B [AF Assist]
and [MF Assist] appear as “---”.
0
All items other than
[Color Space] and
[Reverse Picture] under [Camera Process]
appear as “---”.
0
The zoom and focus positions will be initialized
after the settings are changed.
0
When [Infrared] is configured to “On”, if the type
of light source changes after focus is
established, the image may go out of focus.
96
Splitting the Clips Freely (Clip Cutter Trig)
Shooting
To Next Page
Loading...
Need help?
General
