JVC GY-HC500E User Manual

Saving Setup Files
1
Display the [Setup File] menu.
Select [System] B [Setup File] and press the
Set button (R).
(A P154
[ Setup File ] )
2
Select [Store File] and
press the Set button
(R).
3
Select [Picture File], [User File] or [All File],
and press the Set button (R).
The existing files are displayed.
4
Select the file to be newly saved (or
overwritten) using the cross-shaped
button (JK), and press the Set button (R).
.
4
Memo :
0
Files cannot be written in the following cases.
(Displayed in gray, selection disabled)
0
When the inserted SD card is not supported or
not formatted. (File name appears as “---”.)
0
When a write-protected SD card is inserted
(a z mark appears beside the SD card icon).
5
Name the file.
0
Enter the subname using the software
keyboard.
(A P
109 [Text Input with Software Keyboard] )
0
You can enter up to 8 characters for the
[Store File]/[
Picture File] subname.
Memo :
0
When overwriting an existing file, the subname
of the existing file is displayed.
0
Select
[Cancel] and press the Set button (R), or
press the [CANCEL] button to return to the
previous screen.
6
Select [Store]
and press the Set button (R).
.
6
5
7
Save the file.
0
A confirmation screen appears when you
choose to overwrite.
Select [Overwrite] on the confirmation
screen,
and press the Set button (R). Saving
starts, and “Storing...” appears on the screen.
.
:SUNSET
7
Load Picture File
Cancel
Overwrite
Overwrite Picture File?
0
Saving
starts, and “Storing...” appears on the
screen when the file is newly saved.
.
8
Saving is complete.
After saving of the file is complete, “Complete”
appears on the screen, and the menu screen
closes automatically.
180
Configuring Setup Files
Camera Features

JVC GY-HC500E Specifications

General

Brand	JVC
Model	GY-HC500E
Category	Camcorder
Language	English