Configuring Setup Files
The menu settings can be stored on the camera
recorder or an SD card by saving them as a setup
file.
Loading a saved setup file enables you to
reproduce the appropriate setup state speedily.
The following types of setup files are available.
o
Picture File:
File that contains image creation settings in
accordance
to the shooting conditions ([Camera
Process] menu items).
o
All File:
File that contains all menu settings, ranging from
video format settings to image creation settings
such as device settings and shooting
conditions, as well as the contents of the
[Favorites Menu]. Settings in Network Settings
are not saved.
o
User File:
File that contains settings from All File that are
not included in the [Camera Process
] menu
items.
(A P119 [Camera Process Menu] )
Memo :
0
Make use of the
[Setup File] menu to save or
load a setup file.
0
The following operations can be performed on
the [Setup File] menu.
0
[Saving Setup Files] (A P 180
)
0
[Loading a Setup File] (A P
181)
0
[Deleting Setup Files] (A P
181)
0
Even when [
Record Format] B [System] is
configured to “4K EXT (SSD)” or “HD
EXT(SSD)”, setup files will be saved to this
camera recorder or the SD card.
Number of Storable Setup Files
Camera recorder
: [CAM1] to [CAM4]
SD slot A :
[ W 1 ] to [ W 8 ]
SD slot B :
[ Y 1 ] to [ Y 8 ]
Compatibility
o
User File/All File
0
Only User File/All File of the GY-HC550 and
GY-HC500 series can be loaded.
0
When User File/All File saved using GY-
HC550 are loaded using GY-HC500, the
functions that only exist on GY-HC550 are
ignored.
o
Picture File
Only Picture File of the GY-HC550 and GY-
HC500 series can be loaded.
Configuring Setup Files
179
Camera Features
To Next Page
Loading...
Need help?
General
