KAESER EPC Series User Manual

1. Start the machine and run it up to cut-out pressure.
2. To relieve the filter regulator, turn the adjusting screw anticlockwise until no more resistance is
felt.
3. Turn the adjusting screw clockwise until the pressure gauge reads the required working pressure.
4. Tighten the locknut to fix the adjusting screw in position.
7 Initial Start-up
7.9 Setting the regulator
40
Service Manual 2-stage piston compressor
EPC No.: 9_9431_02 E

KAESER EPC Series Specifications

General

Type	Rotary Screw Compressor
Drive Type	Direct Drive
Cooling System	Air-cooled
Control System	Sigma Control 2.0
Weight	Varies depending on model
Noise Level	62 - 75 dB(A) (depending on model)