KAESER EPC Series User Manual

12.3 Storage
Moisture can lead to corrosion, particularly on the surfaces of the compressor block.
Frozen moisture can damage components, diaphragms, valves and gaskets.
Advice can be obtained from KAESER on storage and commissioning.
CAUTION
Moisture and frost can damage the machine.
➤ Prevent ingress of moisture and formation of condensation.
➤ Maintain a storage temperature of >0 °C.
➤ Store the machine in a dry, frost-proof room.
12.4 Transporting
12.4.1 Safety
Weight and centre of gravity determine the most suitable method of transport.
Precondition Transport only by fork truck or lifting gear with personnel trained in the safe transport of goods.
➤ Make sure the danger zone is clear.
12.4.2 Transporting with a forklift truck
Precondition Machine must stand on a suitable transport medium (pallet).
Fig. 41 Transporting with a forklift truck
➤ Drive the forks completely under the palette and lift carefully.
12.4.3 Transporting with a crane
A suitable lifting frame ensures correct transportation.
The lifting slings must be fully under the machine.
Precondition The lifting gear complies with local safety regulations.
12 Decommissioning, Storage and Transport
12.3 Storage
No.: 9_9431_02 E
Service Manual 2-stage piston compressor
EPC
73

KAESER EPC Series Specifications

General

Type	Rotary Screw Compressor
Drive Type	Direct Drive
Cooling System	Air-cooled
Control System	Sigma Control 2.0
Weight	Varies depending on model
Noise Level	62 - 75 dB(A) (depending on model)