2 Technical Specifications
2.1 Nameplate
The machine's nameplate provides the model designation and important technical information.
The nameplate is located on the outside of the machine (see illustration in chapter
13.1)
➤ Enter here the nameplate data as a reference:
Feature Value
Vehicle identity no.
Permissible total weight
Permissible coupling load
Permissible axle load
Portable compressor
Material number
Serial number:
Year of manufacture
Total weight
Lifting point load capacity
Rated motor power
Engine speed
Maximum working pressure
Tab. 3 Nameplate
2.2 Options summary
A list of the options fitted to your machine helps to relate the information in this service manual.
A list of options fitted is given as code letters on the right side of the coupling load / options label.
The label is to be found
■
on the outside of the machine
■ on the front (see chapter 13.1)
The following table lists all possible options.
Only the codes for those options fitted appear on the label.
2 Technical Specifications
2.1 Nameplate
4
Service manual Portable compressor
M122
No.: 9_6974 20 E
To Next Page
Loading...
Need help?
General
