Long-term decommissioning and storage tasks See
chapter
Confirmed?
➤ Feste et skilt på betjeningspanelet med angivelse av utførte tiltak
fordi maskinen satt ut av drift.
–
Tab. 75 "Long-term decommissioning and storage" checklist
➤ Attach the following notice on the instrument panel showing the decommissioning measures
taken.
Attention!
1. The machine is decommissioned.
2. It is filled with preserving oil.
3. For re-commissioning:
■
Measures for re-commissioning the compressor after a long period of storage.
■ Recommission according to service manual.
Date / signature
Tab. 76 Text for the "long-term decommissioned and storage" information notice
➤ Store in a dry place with even temperature.
12.2 Transport
Precondition Machine switched off and locked off.
The machine is fully vented, the pressure gauge reads 0 bar.
Machine is cooled down.
All compressed air consumers are disconnected.
All connecting lines and hoses disconnected and removed.
Any loose or movable parts that may fall when transporting are removed or secured.
12.2.1 Safety
Allow transportation only by personnel trained in safely dealing with motor vehicles and the
transporting of goods.
1. WARNING!
There is danger of being run over or crushed by an overturning vehicle.
Death or serious injury can result from being crushed or run-over by a machine under tow.
➤
Riding on the machine while it is under tow is strictly forbidden.
2. Make sure the danger area is clear of personnel.
12.2.2 Road transport of the machine as a trailer
Machines with appropriate chassis versions and running gear are approved for towing on public
roads. The machine is designed for a maximum towing speed of 100 km/h. National and local regu‐
lations must be observed when towing the machine on public highways.
12 Decommissioning, Storage and Transport
12.2 Transport
226
Service manual Portable compressor
M122
No.: 9_6974 20 E
To Next Page
Loading...
Need help?
General
