KAESER M122 Service Manual

Feature Specification
Type of fuel Diesel *
Fuel consumption under LOAD mode [l/h] 20.5
Oil consumption related to fuel consumption [%] approx. 0.5
* Use only diesel fuel to EN 590 or ASTM D975. Consult the engine manufacturer on the use of
other fuels if necessary.
Tab. 35 Engine data
2.6.2 Oil recommendation
The engine oil must meet the following classification:
■
ACEA, class E4, E7
■ API, class CF, CI-4
The engine is filled initially with engine oil of viscosity class SAE 10W–40.
Ambient temperature [°C] Viscosity class
−30 ..... 30 SAE 0W–30
SAE 5W–30
−30 ..... 50 SAE 0W–40
SAE 5W–40
−20 ..... 30 SAE 1 W–30
−30 ..... 50 SAE 10W–40
−15 ..... 50 SAE 15W–40
−5 ..... 50 SAE 20W–50
Tab. 36 Engine oil recommendation
Recommended oil for engines with diesel particulate filters
The engine oil must meet the following classification:
■
ACEA, class E6
■ API, class CJ-4
Ambient temperature [°C] Viscosity class Approved by the
manufacturer.
−20 ..... +50 SAE 10W-40 Shell Rimula Signia
10W-40 *
* Use only engine with low white ash build up.
Tab. 37 Recommended oil for engines with diesel particulate filters
2.6.3 Recommended Cooling Fluid
The engine coolant must meet the requirements of specification ASTM D4985.
2 Technical Specifications
2.6 Engine
No.: 9_6974 20 E
Service manual Portable compressor
M122
13
Option lc
RAMIRENT

KAESER M122 Specifications

General

Brand	KAESER
Model	M122
Category	Air Compressor
Language	English