KAESER M122 - Tab. 68 Regular Machine Maintenance Tasks

Component:
Function
Daily A250 A500 A1000 A1500 A2000 A3000 A36000 See chapter Note
Check wear on the brake lin‐
ings.
X 10.7.3.2
Have the wheel brakes adjus‐
ted.
X SW
Check all screw connections,
hinges, locks, handles and snap
fasteners of the doors for wear
and secure fixing.
X
Grease the door hinges. X
Carry out rubber sealing strip
maintenance.
X 10.6
Have the lifting point checked. X SW
Other maintenance tasks
Check all accessible screw fit‐
tings, pipes and clamps for wear
and tightness.
X
Check hoses for proper seating,
leaks and wear.
X
Have hose lines replaced. X SW
Check that all electrical connec‐
tions are tight.
X
Engine SM = engine manufacturer's service manual; SW = specialised workshop.
Tab. 68 Regular machine maintenance tasks
10.2.3.2 Maintenance schedule for options
➤ Carry out maintenance tasks according to the following schedule.
Option
Function
Daily A250 A500 A1500 See chapter Note
Option ea, ec - tool lubricator
Check the oil level in the tool lu‐
bricator.
X 10.8.1
Options da, db, dc, dd – cyclone separator:
Clean and check the dirt trap. X 10.8.2
Options da, db, dc, dd – compressed air aftercooler:
Clean the radiator. X 10.5.2
SW = refer to a specialised workshop; KS = call KAESER Service
10 Maintenance
10.2 Following the maintenance plans
84
Service manual Portable compressor
M122 No.: 9_6974 20 E
RAMIRENT