Component:
Function
Daily
A250
A500
A1000
A1500
A2000
A3000
A36000
See
chapter
Note
Check fuel lines and hose
clamping bands, have replaced
if necessary.
X SW
Change the fuel pre-filter. X 10.3.3 Engine
SM
Replace the fuel micro-filter. X 10.3.3 Engine
SM
Check the fuel return line for
leakage and firm fixing.
X
Have the fuel injectors checked. X SW
Have the fuel injector pump
checked.
X SW
Check the battery electrolyte
level and connections.
X 10.3.9
Compressor:
Check inlet air filter mainte‐
nance indicator.
X 10.4.7
Check the cooling oil level. X 10.4.1
Clean the compressor air filter. X 10.4.7
Clean the oil cooler. X 10.5
Have the pressure relief valve(s)
checked.
X 10.4.8
Check/clean the oil separator
tank dirt trap.
X 10.4.5
Change compressor air filter. X 10.4.7
Change the cooling oil. X 10.4.3
Change the compressor oil filter. X 10.4.4
Change the separator cartridge
in the oil separator tank.
X 10.4.6
Wheels/chassis/bodywork:
Check the tyre pressures. X
Check wheel bolts and nut for
tightness.
X
Carry out chassis maintenance. X 10.7
Grease the ball coupling, joints
and towbar.
X 10.7.2
Brake maintenance X 10.7.3
Engine SM = engine manufacturer's service manual; SW = specialised workshop.
10 Maintenance
10.2 Following the maintenance plans
No.: 9_6974 20 E
Service manual Portable compressor
M122
83
To Next Page
