Prepare the machine with fixed chassis with parking brake) for transport:
1.
Wind the jockey wheel to its uppermost position.
2. Check that the wheels are securely fitted and the tyres are in good condition.
3. Check the tyre pressures.
4. Connect the cable for the lighting and indicator systems and carry out a function check.
5. Release the parking brake:
(see Fig. 84/b).
■ Pull the brake lever a little further on and press the release button.
■ Hold in the release button and push the lever fully down.
6. Remove the chocks.
Prepare the machine with fixed chassis (without parking brake) for transport:
Fig. 85 Safety sign - secure the chocks
1. WARNING!
Missing chocks
Serious injury or death can result from an unsecured machine rolling away.
➤
Secure the chocks in the transport securing device before transporting the machine.
➤ Replace missing chocks immediately.
2. Wind the jockey wheel to its uppermost position.
3. Check that the wheels are securely fitted and the tyres are in good condition.
4. Check the tyre pressures.
5. Attach the lighting and indicator systems and carry out a function check.
6. Remove the chocks and secure them in the transport securing device.
Replacement chocks can be purchased from KAESER representatives. A list is given at the
end of this manual. The part number of the chock is 5.1325.0.
Ensure emergency braking in the case of breakaway from the towing vehicle:
If the compressor breaks away from the towing vehicle, the cable tightens and pulls on the emer‐
gency brake (parking brake).
It is essential that the breakaway cable is threaded through its guides for correct emergency brak‐
ing.
12 Decommissioning, Storage and Transport
12.2 Transport
232
Service manual Portable compressor
M122
No.: 9_6974 20 E
Option sd
Option sh
Option sh
Option sa, sd
To Next Page
