4 Design and Function
4.1 Bodywork
Bodywork is understood to be the exterior of the machine mounted on the chassis.
Fig. 2 Bodywork
1 Right-hand wing door
2 Sound damping louvre for cooler
3 Snap fastener
4 Handle
5 Lower body
6 Left-hand wing door
7 Cover for lifting eye
The bodywork has several functions when it is closed:
■
Weather protection
■ Sound insulation
■ Guarding against touching
■ Cooling air flow
The bodywork is not suitable for the following uses:
■ Persons walking, standing or sitting on the machine.
■ Use as resting place or storage of any kind of load.
Safe and reliable operation is only ensured when the bodywork is closed.
The wing doors are provided with handles for opening. Release the doors by the snap fasteners.
The doors are held open by gas springs.
4 Design and Function
4.1 Bodywork
No.: 9_6974 20 E
Service manual Portable compressor
M122
31
To Next Page
Loading...
Need help?
General
