103
14.5.5 Verification
The verification program menu is opened by activating ”Verification”.
Click on ”Start verification” in order to begin test/verification.
When the test has been completed, the result will be displayed. If the result can be approved, click on “Save”.
The result is now saved in the database under the serial number of the calculator. You can save several results
under one serial number without overwriting earlier results.
14.5.6 Certificate
If you want to print a certificate with saved results, select “Certificate”. The test/verification result can
subsequently be found according to serial number, and the certificate can be printed.
To Next Page
Loading...
