Kamstrup MULTICAL 402 - METERTOOL HCW for MULTICAL

MULTICAL® 402
Kamstrup A/S · Technical Description · 5512-742_M1_GB_01.2016
95
14.2 METERTOOL HCW for MULTICAL
®
14.2.1 Start-up and connection
402
It is important to be familiar with the calculator’s functions before starting programming.
The Kamstrup Software product “METERTOOL HCW” (66-99-724) is used for MULTICAL

402.
MULTICAL
®
402 with USB data cable (66-99-097) MULTICAL
®
There are 2 modes in which to set the program: Basic mode and Advanced mode. In basic mode the date and time
can be set and the meter details can be read. In advanced mode other more advanced features are available as
well. See below.
402 with data cable, RS232 (66-99-108)
Basic
Meter details
Change date and Time
Advanced
Meter details
Change date and Time
Verification
Module setup
Print Label
Certificates
Flow sensor adjustment
(MC402)