Kamstrup MULTICAL 402 - 17 Disposal

MULTICAL® 402
Kamstrup A/S · Technical Description · 5512-742_M1_GB_01.2016
111
17 Disposal
Kamstrup A/S holds an environmental certification according to ISO 14001, and as part of our environment policy
we use materials which can be recovered environmentally correct to the greatest possible extent.
• Disposal
Kamstrup accept outworn MULTICAL

402
The meters should be disassembled as described below and the separate parts handed in for approved
destruction. The batteries must not be exposed to mechanical impact and the lead-in wires must not be short-
circuited during transport.
for environmentally correct disposal according to previous agreement.
The disposal arrangement is free of charge to the customer, except for the cost of transportation to Kamstrup A/S
or the nearest disposal system.
Item
Material
Recommended disposal
2 x AA Lithium cells Lithi
um and thionyl chloride
2 x AA-cells: About 2 x 0.7 g lithium
Approved deposit of lithium
cells
D-cell lithium battery Lithium and thionyl chloride >UN
3090< D-cell: About 4.5 g lithium
Approved deposit of lithium
cells
PCBs in MULTICAL

(remove LC-display)
402
Coppered epoxy laminate,
components soldered on
PCB scrap for metal recovery
LC display Glass and liquid crystals Approved processing of LC-
displays
Cables for flow sensor and sensors Copper with silicone mantle Cable recovery
Transparent top cover PC Plastic recycling or
combustion
PCB case and connecting base ABS with TPE gaskets Plastic recycling or
combustion
Wall bracket PC + 20% glass Plastic recycling or
combustion
Meter case
Clamp plate
Transducer/reflectors
> 84% alpha brass/red brass
< 15% common steel (St 37)
< 1% stainless steel
Metal recovery
Packing Environmental cardboard Cardboard recycling
Packing Polystyrene
EPS recovery
Please send any questions you may have regarding environmental matters to:
Kamstrup A/S
Att.: Quality and environmental dept.
Fax.: +45 89 93 10 01
info@kamstrup.dk
As from August 2005 Kamstrups heat meters are marked according to EU
Directive 2002/96/EEC and the standard EN 50419.
The purpose of the marking is to inform our customers that the heat meter
cannot be disposed of as ordinary waste.