K&R ACD320 Series User Manual

ACD320 user manual Parameter Description
- 102-
F7.30
The 0
st
step running time. 0～999.9
0
F7.31
The 1
st
step running time. 0～999.9
0
F7.32
The 2
nd
step running time. 0～999.9
0
F7.33
The 3
rd
step running
time.
0～999.9
0
F7.34
The 4
th
step running
time.
0～999.9
0
F7.35
The 5
th
step running
time.
0～999.9
0
F7.36
The 6
th
step running
time.
0～999.9
0
F7.37
The 7
th
step running
time.
0～999.9
0
In simple PLC run mode, PLC run and skip the step whose running time is set to be 0, and
simple PLC run will not operate if all the set is 0.
When PLC run from 0th to the 7th step, the parameter corresponding to the frequency set is
F4.29~F4.36.
Function Code Name Setting Range
Default
Value
F7.38
PLC selection record or
not when power off.
0: Record when power off
1: No record when power
off
0
PLC selection record or not when power off means whether to record the running status
before power off.
Function
Code
Name Setting Range Default Value
F7.39
running time unit
0:s
1:min
0
F7.40
Failure shield
0: Effective
1:Ineffective
0
Discription of failure shield display:
Display content when stop Code
BIT0: Module protection shield
0:Invalid 1: Valid
1
BIT1: Soft overcurrent shield.
0:Invalid 1: Valid
2
BIT2: Over-voltage shield.
0:Invalid 1: Valid
4

K&R ACD320 Series Specifications

General

Brand	K&R
Model	ACD320 Series
Category	Inverter
Language	English