Chapter 2. Installing and Using RF ValProbe Software
46 RF ValProbe® User’s Manual
2.6 Viewing the RF ValProbe Hardware Inputs (cont.)
•
To customize your view of the Hardware screen, click on the Customize Column
Layout
icon , or click View Options>Customize Column Layout from the View
Options menu. In addition to Status, Logger model number, and current temperature
and humidity readings, you can select or deselect auxiliary inputs and contacts,
percentage of battery life remaining, stability, calibration and calibration verification
dates, probe ID, firmware version, RF strength, number of readings and time received.
• To refresh the view click the Refresh view button . This button reloads and
redisplays information on Hardware view screens when the initial view of the Loggers
or the commands sent to Loggers do not appear. Try clicking the Refresh button if a
screen or a process seems to be stopped or frozen.
To Next Page
Loading...