V7.00
24905_EDEBDA0272-5019-1_EN
41
After pressing the
() button, the following appears in the display:
Display as example:
Main menu: = cosφ actual (instantaneous)
Stage mode: = Stages 17 to 24 Automatic mode On
Fan: = On
Alarm relay: = On
Alarm message: = exists (!)
Menu description: = cosφ actual (instantaneous)
Measured cosφ: = 0.87 inductive
Switching on/o: = Switch on,
since capacitor power is missing
Missing
compensation power
= 57.0 kvar
NOTE
This window is only displayed if more than three additional relay modules are scanned
(which can be seen from the button designation over
)
System operation
To Next Page
Loading...
