V7.00
24905_EDEBDA0272-5019-1_EN
59
System operation
Target cosφ binary coded (setting 16cd):
For this setting a DI additional module is sucient to activate one of 16 dierent cosφ
values, as the on/o statuses of the digital inputs here are evaluated according to the
following table:
Input 1 Input 2 Input 3 Input 4 enter value
where applicable
Target Cosine φ A o o o o
Target Cosine φ B on o o o
Target Cosine φ C o on o o
Target Cosine φ D on on o o
Target Cosine φ E o o on o
Target Cosine φ F on o on o
Target Cosine φ G o on on o
Target Cosine φ H on on on o
Target Cosine φ I o o o on
Target Cosine φ J on o o on
Target Cosine φ K o on o on
Target Cosine φ L on on o on
Target Cosine φ M o o on on
Target Cosine φ N on o on on
Target Cosine φ O o on on on
Target Cosine φ P on on on on
To Next Page
Loading...
