KBR multicomp D6 7 Series - Page 70

V7.00
24905_EDEBDA0272-5019-1_EN
70
System operationSystem operation
Example 2: Settings:
Mode AI 3 Q
t-delay 000
Q/Pn A (bottom) 0.484 ind.
from (%) 0%
to (%) 50%
Q/Pn B (top) 0.484 cap.
from (%) 50%
to (%) 100%
AI 4-20 mA No
Hysteresis (%) 9%
Function:
With an input voltage of 0V (= 0%) the target value of Q/P rated would be 0.484 ind.
With an input voltage of 5V (= 50%) the target value of Q/P rated would be 0.000.
With an input voltage of 10V (= 50%) the target value of Q/P rated would be 0.95 cap
Example schematic diagram:
50%
Hysterese
hysteresis
A
B
cosphi1 = 1,0
übererregt
over-exited
(kapazitiv
capactiv)
untererregt
under-exited
(induktiv
inductiv
100%
5V
10V
0%
50%
100%
Einstellbereich in %
setting range in %
0V
Ziel-Q/Pnenn
target Q/P rated
0,484
ind. 0,484