V7.00
24905_EDEBDA0272-5019-1_EN
69
System operationSystem operation
Example 1: Settings:
Mode AI 3 Q
t-delay 000 seconds
Q/Pn A (bottom) 0.484 ind.
from (%) 0%
to (%) 50%
Q/Pn B(top) 0.484 cap.
from (%) 50%
to (%) 100%
AI 4-20 mA No
Hysteresis (%) 0%
Function:
With an input voltage of 0V (= 0%) the target value of Q/P rated would be 0.484 ind.
With an input voltage of 5V (= 50%) the target value of Q/P rated would be 0.000.
With an input voltage of 10V (= 50%) the target value of Q/P rated would be 0.95 cap
Example schematic diagram:
0,000
ind.
ind. 0,484
A = 0%
B = 100%
50%
5V
10V
0%
50%
100%
Einstellbereich in % bei AI 0-10 V
setting range in % at AI 0-10 V
Ziel-Q/Pnenn
target Q/P rated
0V
kap.
cap. 0,484
To Next Page
Loading...
