KBR multicomp D6 7 Series - Page 85

V7.00
24905_EDEBDA0272-5019-1_EN
85
Leave setting menu without saving
Leave settings menu and save
P  N 
NO YES


Enter value
Display hot-key area
Return
P  N 

EDIT
Assignment of switchgear cabinet No.
Display hot-key area
Submenu 3: Module detection (ashing on and o). Here the corresponding mod-
ule can be set to a ashing mode, so it can be uniquely allocated.
Submenu 4: Module type – Display and current rmware version of the module.
For example, Temp is entered here for the temperature input module,
2.00 as
the rmware version and r007 as the release of the rmware version.
After pressing the

() button, the following appears in the display:
After pressing the

or

button, the following appears in the display:
NOTE
Additional modules - function of the module DIP switches and module scan buttons, see
Appendix!
System operationSystem operation