KBR multicomp D6 7 Series - Page 84

V7.00
24905_EDEBDA0272-5019-1_EN
84
For previously set modules, the switchgear cabinet allocation can be changed by pressing

. Further modules can be displayed and congured using

() and
N
().
After pressing the

(Para) button, the following is displayed in the hot key area:
After pressing the

(EDIT) button, the following is displayed in the hot key area:
Return
Number of additional modules
Module administration
P  N 
 

Para
Conguring
switchgear cabinet No.
Number of additional modules
Menu description
Display hot-key area
Return
Continue with submenus 3 and 4
P  N 
 

Para
Conguring of switchgear cabinet No.
Deleting the displayed scanned mode
Display hot-key area
Return
P  N 
 Para
Allocation
of switchgear cabinet No.
Display hot-key area
System operationSystem operation