V7.00
24905_EDEBDA0272-5019-1_EN
95
Display example for Mode 2:
NOTE
In Mode 2 under menu item stage management, instead of the operating cycle, the oper-
ating hours (turn-on duration) of the compensation stage are displayed.
Moreover in this mode, in the menu switching-hysteresis / mode with the parameter
24 h ¶ exchanging the connected compensation stage with equivalent stages, but with
fewer operating hours, can be activated/deactivated.
However, the prerequisite is that the equivalent stage:
• has the same compensation power
• the previous stage runtime is lower (at least 12 hours)
The exchange takes place every 24 hours.
System operation
Cos U/I T MM St U h I h Extra
6
d
To Next Page
Loading...
