KEB COMBIVERT F5 Reference Manual

177
LS - Speed Prole Parameters
Inspection Speed Prole Rate Settings
Acceleration rate for Inspection Speed prole.
Start Jerk rate into acceleration for Inspection Speed.
Acceleration Jerk rate into inspection speed for Inspection Prole.
Deceleration rate for Inspection Speed prole. If the enable is dropped when
the user releases the inspection switch, there will be no deceleration.
Jerk rate out of inspection speed for Inspection Speed prole.
Jerk rate out of deceleration into leveling speed and from leveling speed to
zero speed for Inspection Speed prole.
LS50
Acceleration Inspection
LS51
Start Jerk Inspection
LS52
Acceleration Jerk
Inspection
LS53
Deceleration
Inspection
LS54
Deceleration Jerk
Inspection
LS55
Stop Jerk Inspection

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)