KEB COMBIVERT F5 Reference Manual

The KEB LCD operator supports both imperial and metric units. Toggling
between unit settings only scales the parameters and does not change any
internal values.
The units can be changed at Home > Prog > Basic Setup > US02
The ability to change units is dictated by the user access level.
4.7.3 Units
i
83
LCD Keypad

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)