KEB COMBIVERT F5 Reference Manual

267
DB - Debug Parameter (Combivis only)
These parameters display the execution time of the timer interrupts that are
used to execute the software’s primary functions.
This group is only visible with Combivis.
6.18 DB - Debug Parameter Group
(Combivis only)
DB00
Input Status
DB01
DIN/Switch/ServSLV
Time
DB02
Lift Com Time

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)