KEB COMBIVERT F5

The LCD keypad has a real-time clock and stores the date. This allows the
operator to keep time stamps of faults and track total run hours.
The Serial/CAN operator does keep track of the time/date and will do so
for several weeks without power.
The date can be initialized from the home screen by selecting Prog > Setup
> Date. Press “Enter,” scroll to edit the parameter and press “Enter” again to
save the changes.
The date format is mm/dd/yyyy.
The time can be initialized from the home screen by selecting Prog > Setup >
Time. Press enter, scroll to edit the parameter and press enter again to save
the changes.
The time format is 24-hour.
4.9 Date & Time

4.9.1 Setting the date
4.9.2 Setting the time
86
LCD Keypad