KEB COMBIVERT F5 Reference Manual

339
Replacement Parts
Part Number Description
00F5060-KL10 v3.34 LCD Serial Elevator Keypad Operator
1MF5K81-DZ19 TTL Encoder Card Kit (SubD; <= E housing)
2MF5K81-DZ19 TTL Encoder Card Kit (SubD; >= G housing)
1MF5K81-BZ05 TTL Encoder Card Kit (Screw-in Terminals; <= E housing)
2MF5K81-BY05 TTL Encoder Card Kit (Screw-in Terminals; >= G housing)
1MF5K8G-PZ43 EnDat Encoder Card Kit (D, E housing)
2MF5K8G-PY33 EnDat Encoder Card Kit (>= G housing)
0090390-K000 Ferrite Ring for E, G, H Housing and R6
0090395-K001 Ferrite Ring for R (1 Required) and U Housing ( 2 re-
quired)
***Control Card*** Contact KEB w/ F5 drive serial number
***Whenever replacement parts are needed it is required that the
F5 drive serial number is given to the KEB Service and Repair De-
partment to ensure the correct parts are sent with each replace-
ment part kit. This will prevent software and hardware incompat-
ibility problems when interchanging parts***

11. Replacement Parts

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)