KEB COMBIVERT F5 Reference Manual

The KEB drive can also be programmed via the mobile lift app. The KEB
Elevator app connects to the F5 elevator drive via a phone’s bluetooth
connection. Setup, adjustment and troubleshooting of the F5 drive can be
done using the mobile app.
Features
• Real-time diagnostic and troubleshooting dashboard.
• View and adjust parameters.
• Save parameters and email parameter reports.
• View PDF manuals for the F5 drive.
Requirements
The mobile app communicates with the F5 drive through a bluetooth dongle
connected to the drive. Contact the OEM to order the bluetooth dongle to
enable the mobile app.
• Part # 0058K60-L060
More Information
For more information about the mobile app, go to the following webpage:
kebamerica.com/elevator_app_download/
Or you can contact a KEB elevator engineer at 952-224-1400
or email elevator@kebamerica.com.
5.2.2 KEB Elevator App
Initial Start Up
92

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)