KEB COMBIVERT F5 Reference Manual

193
LC - Control Setting Parameters
Percentage increase or decrease of the proportional gain at high speed after the
point of resonance has been passed. In some cases it is benecial to reduce
the gain at high speed to minimize system response to hoistway vibrations or
disturbances. When set to 100%, this function is effectively off.
High
Speed
Speed
Proportional
Gain
Time
Time
LC25
LC25
KP High Speed

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)