KEB COMBIVERT F5

247
FB - Field Bus Parameters
FB50 - 53: DIN66019 Serial Communication Error Logs
Used for troubleshooting.
Used for troubleshooting.
Used for troubleshooting.
Used for troubleshooting.
This parameter is used to control the transmit enable, TxE, in regards to the
response telegram from the drive when using DIN66019 serial communication.
Setting: Description: NUM
Full Duplex Single Node - Transmit enable is held ON. 0
Half Duplex Multi-drop - Transmit enable shut off after
each response telegram
1
Default = Full Duplex (0)
FB50
Temporary DIN
Communication Error
Counter
FB51
Temporary DIN
Communication Error
Service
FB52
Temporary DIN
Communication Error
Acknowledgement
FB53
Temporary DIN
Communication Error
Value
FB54
RS485 Mode