Operation Manual ServoOne Supply Unit
23
ID no.: 1101.21B.6-00 Date:04/2020
NOTE:
On butt mounting devices with different drive powers you should arrange the
devices in descending order by power rating (e.g., viewed from the left,
BG4-BG3-BG2-BG1). This arrangement will minimise the thermal interaction.
The supply unit must always be tted beside the axis controller with the
highest power.
E
G
F
F
Figure 3.13 Mounting distance, liquid cooling housing variant BG5 + BG6a (symb. depiction)
G
F
F
E
Figure 3.14 Mounting distance, liquid cooling housing variant, based on BG7 as an example
Mechanical installation
To Next Page
Loading...
