Keba ServoOne Series - Current Required for the Control Supply; Pre-Assembled Connection Cables

Operation Manual ServoOne Supply Unit
79
ID no.: 1101.21B.6-00 Date:04/2020
A.3 Pre-assembled connection cables
For devices of size BG5, pre-assembled connection cables are available for the DC link
coupling. For devices of sizes BG6a and BG7, connection cables must be specied by
the customer. Dene the cable cross-section according to local regulations and condi-
tions. It is dependent on the cable protection, the type of cable laying and the ambient
temperature.
Type L Cross-section Model Connection
DC link
BG5
193mm 20mm²
Flat copper braid
covered with double
heatshrink sleeve
Flat lug with hole
Ø5.5mm on both
ends
Sketch
L
4
15
Table A.11 Technical data, pre-assembled connection cables
A.2 Current required for the control supply
Size BG5 BG6a BG7
Device
SO84.040
SO84.076
SO84.115
SO84.170
SO84.375
SO84.540
Terminal X9, X10 X44
Wall mounting
Typ. starting current 7A 10A -
Continuous current 2.5A 8A -
Liquid cooling
Typ. starting current 7A 8A 4A
Continuous current 2A 2A 2A
Table A.10 Current required for the control supply
Appendix