KEEWAY RKV125 - Page 14

Figure 1-23 Figure 1-24
2. Tools used for chassis overhaul
Common and special tools, as well as their pictures for chassis component assembly and disassembly are listed in
Table 1-25 and Table 1-26.
Table 1-25
Name
Remarks
Torque wrench
Allen wrench
Socket wrench
Micrometer
Magnetic stand, V-block
Dial gauge
Vernier caliper
Spring clamp ring pliers
Hammer screwdriver
Front fork oil seal installer
Front fork seal driver
Steering nut wrench
Figure 1-27
Figure 1-28
Figure 1-29
Figure 1-30
Figure 1-31
Figure 1-32
Figure 1-33
Figure 1-34
Figure 1-35
Figure 1-36
Figure 1-37
Figure 1-38
（1）General tools used for chassis overhaul
Continued Table 1-26
Figure 1-27 Figure 1-28
Figure 1-29 Figure 1-30