Data Acquisition / Multimeter System User's Manual Section 3:
DAQ6510-900-01Rev. A / April 2018 3-7
3. Select Next. The Select Communication Bus dialog box is displayed.
Figure 18: Select Communication Bus dialog box
4. Select USB.
5. Click Next. The Select Instrument Driver dialog box is displayed.
Figure 19: Select Instrument Driver dialog box
6. Select Auto-detect Instrument Driver - Model.
7. Click Next. The Configure USB Instrument dialog box is displayed with the detected instrument
VISA resource string visible.
8. Click Next. The Name Virtual Instrument dialog box is displayed.
To Next Page
Loading...
