4 Features and Functions
128 Keysight 34970A/34972A User’s Guide
– Remote Interface Operation: The following program segment configures the
instrument for an externally controlled scan.
To configure the instrument for 4-wire external scanning, send the following
command.
ROUTe:CHANnel:FWIRe {OFF|ON}[,(@<ch_list>)]
TRIG:SOUR TIMER Select the scan interval
ROUT:CHAN:ADV:SOUR EXT Select the channel advance source
TRIG:TIMER 5 Set the scan interval to 5 seconds
TRIG:COUNT 2 Sweep the scan list 2 times
INIT Initiate the scan
To Next Page
Loading...
