4 Features and Functions
194 Keysight 34970A/34972A User’s Guide
Remote Interface Configuration - 34972A
This section gives information on configuring the instrument for remote interface
communication. For more information on configuring the instrument from the
front panel, see “To Configure the Remote Interface” starting on page 68. For
more information on the SCPI commands available to program the instrument
over the remote interface, see the Keysight 34970A/34972A Programmer’s
Reference Help.
All of these menu items are accessed under the top-level menu:
LAN INTERFACE
Enabling and disabling LAN connectivity
You can enable or disable the LAN connectivity. If you are not controlling the
instrument via LAN, it is a good idea to disable LAN connectivity in order to
prevent others from connecting to your instrument over the LAN.
– Front-Panel Operation:
LAN ENABLED/DISABLED
Determining the status of LAN connectivity
You can determine whether you are connected to the LAN. This menu item simply
indicates the status; it does not allow you to connect. If your instrument loses LAN
connectivity, it may take up to 30 seconds for the LXI FAULT message to appear.
– Front-Panel Operation:
STAT:CONNECTED/LXI FAULT
Resetting the LAN
You can reset the instrument's LAN settings to their default values.
– Front-Panel Operation:
RESET LAN: NO/YES
To Next Page
Loading...
