1Quick Start
34 Keysight 34970A/34972A User’s Guide
To Prepare the Instrument for Use
1 Check the list of supplied items.
Verify that you have received the following items with your instrument. If
anything is missing, contact your nearest Keysight Technologies Sales Office or
Keysight authorized reseller.
–One power cord.
–This User’s Guide.
–One Service Guide.
– Certificate of Calibration (if you ordered the internal DMM).
– BenchLink Data Logger 3 Software on CD-ROM.
To install the software, see page 36.
– Quick Start Package (if you ordered the internal DMM):
One RS-232 cable (34970A only).
One J-type thermocouple and a flatblade screwdriver.
– Any plug-in modules that you ordered are delivered in a separate shipping
container.
2 Verify that the fuse on the back is set to the proper voltage range for your AC
power.
Note that this switch is Standby only.
To disconnect the mains from the instrument, remove the power cord.
To Next Page
Loading...
