Keysight 34972A - Instrument Preset State

Features and Functions 4
Keysight 34970A/34972A User’s Guide 205
Instrument Preset State
The table below shows the state of the instrument after a PRESET from the
Sto/Rcl menu or SYSTem:PRESet command from the remote interface.
Measurement Configuration
Function
Range
Resolution
Advanced Settings
Totalizer Reset Mode
Totalizer Edge Detect
Instrument Preset State
No Change
No Change
No Change
No Change
Count Not Reset When Read
Rising Edge
Scanning Operation
Scan List
Reading Memory
Min, Max, and Average
Scan Interval Source
Scan Interval
Scan Count
Scan Reading Format
Monitor in Progress
Instrument Preset State
No Change
All Readings are Cleared
No Change
No Change
No Change
No Change
No Change
Stopped
Mx+B Scaling
Gain Factor (“M”)
Scale Factor (“B”)
Scale Label
Instrument Preset State
No Change
No Change
No Change
Alarm Limits
Alarm Queue
Alarm State
HI and LO Alarm Limits
Alarm Output Configuration
Alarm Output State
Alarm Output Slope
Instrument Preset State
No Change
No Change
No Change
No Change
Output Lines are Cleared
No Change